Polyurethane Foam Combined Polyether for Imitation Wood

Overview

This combined polyether is a fully formulated polyol component for rigid polyurethane foam used to make imitation-wood (synthetic wood) parts such as decorative profiles, frames and furniture components. It produces high-density rigid foam with a fine, wood-like surface that can be cut, nailed and painted. It contains polyether polyols together with catalysts, foam stabilizers and blowing agents, and is foamed by mixing with polymeric MDI at the ratio given in the technical data sheet.

Also known as

Combined polyether; Polyol premix (polyol side of a two-component rigid foam system)

Specifications

Test items	Specifications
Appearance	Light yellow transparent liquid
Viscosity (25℃) /mPa·s	500-1500
Density (25℃) /(g/cm³)	1.15±0.10
Hydroxyl value /(mgKOH/g)	350±50
Water content /%	0.2-2.5

Applications

• Imitation-wood decorative moldings, frames and panels
• Furniture parts and home decoration
• Other high-density rigid foam castings

Packaging

220 kg/drum; 1000 kg/IBC.

Storage

Store sealed in a cool, dry and ventilated place at 15–25 ℃, away from heat and direct sunlight. Mix well before use.