Polyurethane Foam Combined Polyether for Pipes

Overview

This combined polyether is a fully formulated polyol component for rigid polyurethane foam used to insulate pre-insulated pipes. It offers good flow in long pipe sections and low thermal conductivity. It contains polyether polyols together with catalysts, foam stabilizers and blowing agents, and is foamed by mixing with polymeric MDI at the ratio given in the technical data sheet.

Also known as

Combined polyether; Polyol premix (polyol side of a two-component rigid foam system)

Specifications

Test items	Specifications
Appearance	Light yellow transparent liquid
Viscosity (25℃) /mPa·s	300-600
Density (25℃) /(g/cm³)	1.06±0.20
Hydroxyl value /(mgKOH/g)	350±50
Water content /%	0.4-2.0

Applications

• Pre-insulated pipes for district heating and cooling
• Oil, gas and chemical pipelines
• Pipe fittings and valves insulation

Packaging

220 kg/drum; 1000 kg/IBC.

Storage

Store sealed in a cool, dry and ventilated place at 15–25 ℃, away from heat and direct sunlight. Mix well before use.